The 2711-T10G8 is a PanelView 1000 Grayscale Terminal with 10.4-inch Touch Screen with a replaceable backlight designed to operate up to 50,000 hr 1/2. Operator input and commands are initiated using the Touch screen interface. The operator only needs to press the corresponding object in the screen. The Touchscreen interface is designed for up to 1 million actuations. Avoid simultaneous press on the screen to avoid unintended operation. The operator terminal supports hierarchical arrangement of the process screens where displays can be made as an overview, area display up to process specific and equipment view. It has a Data Highway Plus (DH+) Communication for data exchange between Data Highway Plus (+) compatible devices. It also has an RS-232 configurable as application download port or alarm Printer Port for connection to an alarm printer for documentation of alarm lists and messages. The Operator terminal is AC powered with a power supply range of 85…264V AC and frequency of 47…63 Hz and is suitable for installation in a NEMA Type 12/13 and 4X compliant panel or enclosure. The operator terminal operating temperature is 135 ° C or 275 °F. Never install the terminal where gases have ignition temperature of lower than than 135 °C (275 °F). When installing the PanelView 1000 Standard Operator Terminal, the required panel cut-out size is 257 mm. (10.11 in) x 338 mm (13.29 in). Maintain 2 inch clearance on all sides of the terminal for adequate air path and insertion of add-on components. The terminal is configured using PanelBuilder32 configuration software.